Water Based Contact Adhesive is strong, adjustable and ideal for use in sensitive areas.
• Safe, clean and easy to apply
• Solvent-free and non-flammable
• High initial grab plus placement flexibility
• Excellent bond strength and gap-filling properties
Intastop Water Based Contact Adhesive is totally solvent-free, low odour, and specially developed for applications such as hospital wards where solvent-based adhesives would be unsuitable. Eliminating both air contamination hazards and the need for expensive extraction equipment, it is non-flammable, creates no fire hazards and requires no special storage facilities.
A one-part panel adhesive specially developed to make high strength, permanent bonds, Intastop Water Based Contact Adhesive is ideal for bonding most types of wall cladding direct to internal plastered wall surfaces or timber battens directly onto walls without other fastenings and may be used for a wide variety of other applications. It is easy to apply to the wall using a hand trowel and has good gap-filling properties.
|ADW/01/BUC||Water Based 1 Part Contact Adhesive, 12kg bucket|
Pack Sizes: 12kg buckets (approx. 10L)
Coverage: 3m² per litre at a 0.25mm depth of dry adhesive
Open Joint Time: 15 minutes to 4 hours
Polymer Type: Polychloroprene
Heat Resistance: Up to 70ºC
Cleaner: Soapy Water
Shelf Life: 12 months from date of manufacture
Storage: 5-25ºC, protect from frost
Colours & Finishes